产品详情
Description
This machine, appropriate for the mixing processing experiment of engineering plastics, modified plastics, waste plastics and color masterbatch etc., is featured by plasticizing homogeneity, color proofing and filling modification.
Typical Application
<Filling modification
<Blending modification (rubber blending, plastic alloy)
<Processing after exhaust and devolatilization
<Reactive extrusion
<Function of maternal
<Glass fiber (carbon fiber) reinforced
<Metal, ceramic powder masterbatch
Screw diameter | 16mm,18mm |
Length diameter ratio | 25:1, other length diameter ratio (10~30 times) optional |
Screw form | Parallel and rotating in the same direction, modular twin screw |
Temperature range | Room temperature~300 ℃ or customized |
Control accuracy | ±2℃ |
Controller | PLC controller type |
Screw material | 40CrNiMo high-strength alloy structural steel or other customized materials |
Compound mode | The compound mode of the screw suite is building block spiral.The material barrel is a multistage combination, which can be opened and closed. |
Heating zone | Multi zone temperature control for material barrel and machine head, and installation of stainless steel safety cover |
Cooling facility | Fan cooling or water cooling |
Handpiece | Flange interface, which can be connected to the mold for extrusion tests such as film blowing, casting, pipes, sheets, profiles, etc |
Driving power | 1-2.2KW |
Power supply | 3∮，AC380V，50Hz三相五线 3∮,AC380V, 50Hz three-phase & five-wire |
Volume | ≧800×550×600 (L×W×H)mm |
Weight | ≧150 kg |