Four Steps to Correct Operation of Small Plate Vulcanizer
Date: 2024-07-08
Click: 99

The flat vulcanization machine is mainly used for vulcanizing flat tape and belongs to hydraulic machinery. The main function of the flat vulcanization machine is to provide the pressure and temperature required for vulcanization. Shiyan Machinery introduces the four steps of correct operation for small flat vulcanizing machines.


Firstly, it is necessary to adjust the roller pitch and maintain a balanced roller pitch. If the adjustment of the distance between the two rollers is not the same, it will cause the roller to be overloaded and easily damage the equipment, which is strictly prohibited.

Secondly, the feeding amount of the small flat vulcanizing machine should gradually increase, and the weight of the feeding blocks should not exceed the provisions in the equipment manual. The feeding sequence should be continued from small to large


Once again, when pushing the material on the small flat vulcanizing machine, it is necessary to hold your fist halfway and not exceed the horizontal line at the top of the cylinder.


Finally, it is prohibited for workers to lean or stand on the rotating parts and material trays of small flat vulcanization machines.


There are many correct operating steps for a small flat vulcanizing machine, and the most important one is to prevent collisions and collisions with people, and to prevent overloading and overturning that may harm people during loading.

   




The price issue of small flat vulcanizing machines is believed to be a concern for most consumers, as there is a significant price difference between different brands. Users who are not familiar with small film blowing machines and small flat vulcanizing machine products may feel confused and confused. So how much is a regular flat vulcanization machine more reasonable and suitable for purchase? You can click on online customer service to inquire! Or call the service hotline: 0769-85960096

Category: Industry News
Author: 世研
Previous: Analysis of the causes of working noise in plastic extruders
Next: Three suggestions for selecting qualified small film blowing machine products