- Principle of product
- Product parameters
Description
This machine is a double-layer film extrusion equipment. It is suitable for testing and evaluating the casting properties of polymer materials and developing new product formulations. It is the preferred equipment for major manufacturers and research institutes.
Typical Application
█ The casting performance test and evaluation of polymer materials
█ New product development
█ Optimization of production process parameters
█ Narrow film small scale production
Single screw extruder | |
Screw diameter | Ø20/30mm (optional) |
Length diameter ratio | According to material characteristics |
Screw rotation speed | Frequency Conversion Speed Regulation |
Temperature range | Normal temperature～350℃ |
Temperature accuracy | ±1℃ |
Screw and feeding barrel | 38CrMoAl nitriding steel |
Heating zone | Multi-stage heating from barrel to nose, covered with stainless steel safety hood |
Cooling system | Fan cooling |
Motor power | 2.2KW-5.5KW |
Arrangement | Parallel or 90 Degree Arrangement |
Power supply | 3∮，AC380V，50Hz |
Cast cold roll unit and winding system | |
Die | T hanger type |
Heating method | Internal heating |
Installation method | Vertical Installation |
Die-lip width | 300mm |
Effective thickness of product | 0.01-0.2mm (according to material) |
Cold roll size | ￠200×L320mm |
Traction motor | Servo control |
Wheel size | ￠30×L320mm |
Rewinding Method | Torque Control |
Control system | PLC control |
Power supply | 3∮，AC380V，50Hz |
Weight | About 580kg |