产品详情
Description
This machine applies to the compression and moulding of rubber, plastics, resins and other polymer materials. It is equipped with a programmable LCD, which can set pressure, temperature, time, exhausting frequency and the number of seconds with human-machine interface operating system. The vulcanization process will be dynamically and instantly displayed and monitored. The mould pressing process will be completed automatically. This machine is very simple with extensive and efficient application and energy efficiency.
Typical Application
<Detection of material gel (fish eyes), black spot and stain
<Material preforming, color matching, blending and sample
preparation
<Physical properties test
<Material R & D
Capactiy | 100/200/300 tons (optional) |
Maximum working pressure | 25Mpa |
Controller | PLC programmable color touch screen has human-machine interface. All the operating parameter can be set and controlled at will. |
Temperature range | Normal temperature～300℃ |
Temperature accuracy | ≤2℃ |
Heating method | Electric heating tube/Oil heating（optional） |
Vulcanization time | 0-999，3 sections |
Pressing plate layer | Double mould pressing structure. Upper and lower layer are heating |
Pressing plate size | 400×400/450×450/500×500 （other sizes can be customized） |
Distance of pressing plate | 150～300mm |
Surface of pressing plate | HRC60 chromium plating |
Pressurization in gradient | 3 sections |
Sensor | Specially configured |
Valve plate in special type | Specially configured |
Double proportional valve | Specially configured |
Exhausting frequency | 0～10 times |
Exhausting pause | Yes |
Oil pressure system | Closed loop control system of electro-hydraulic proportion servo valve |
Speed of fuel tank | Two-speed function of 11~50mm/s: adopt high approach speed in low pressure and low approach speed in high pressure |
Volum | 3300×1600×2100（W×D×H）mm |
Power supply | 3∮，AC380V，60A, three-phase and five-line power supply (The connection port is provided by the customer) |