产品详情
Description
This machine is mainly used to detect the feasibility of blowing film of polymer materials and the colloidal state within the material, as well as the dispersion of colored dispersions, control mixtures, and extrudates. This machine has a compact structure and can be operated on an experimental platform, with a small floor area. It is suitable for use in universities, scientific research institutions, and factory laboratories.
Typical Application
<Gelatin
<Color distribution
<Test the dispersive property of color masterbatch
<Material processing properties
<Quality control
Single Screw Extrusion Machine | ||
Screw diameter | 16-25mm (optional) | |
Length ratio | 28:1, other length ratios(10 to 33 times) are optional | |
Speed adjustment | Frequency converter control | |
Controller | Instrument control | |
Temperature range | Room temperature~300 ℃ or customized | |
control accuracy | ±2℃ | |
Heating method | Electric heating coil | |
Heating zone | Multi section zoning, precise temperature control | |
Screw & Barrel material | 38CrMoAl advanced nitrided steel or other customized materials | |
Cooling device | Multi-wing fan super static forced air cooling | |
Driving power | Precision reduction motor | |
Film Blowing Auxiliary Machine | ||
Diameter of dies | 20-30mm | |
Huffing air | Compressed air | |
Cooling air | Silent fan | |
Dimension of the carry-over pinch roll | Ø80×L350mm | |
Traction line speed | 0.5~5m/min is adjustable | |
The maximum folded diameter of the thin film | 150-200mm Depending on material properties | |
Traction electric machine | 90W | |
Winding method | Constant torque winding | |
Power supply | 3∮,AC380V, 50Hz three-phase & five-wire | |
Overall equipment size | ≧1000×500×1400 (L×W×H)mm | |
Total equipment weight | ≧180 kg | |